DM500hd OpenPli Oscam – DM500HDv2 Newnigma2 Mgcamd prblm

Home Forums Dreambox DM500hd OpenPli Oscam – DM500HDv2 Newnigma2 Mgcamd prblm

This topic contains 3 replies, has 2 voices, and was last updated by  Zulan 4 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #4270

    hano
    Member

    Jag har nu hållit på i några dagar och försökt få igång dreambox i sovrummet. Har bild i vardagsrummet med CD kortet.
    Jag ser inte felet och är mycket tacksam för hjälp.

    Nedan är mina konfig filer och en telnet session från mgcamd.
    Verkar som mgcamd inte kopplar upp sig över nätverket.

    Vardagsrum DM500hd OpenPli Oscam
    Sovrum DM500HDv2 Newnigma2 Mgcamd 1.35a

    oscam.conf

    [global]
    # disablelog = 1
    # disableuserfile = 1
    # usrfileflag = 0
    maxlogsize = 1000
    preferlocalcards = 1
    # saveinithistory = 1
    # lb_mode = 0
    # unlock_parental = 1
    lb_retrylimit = 1600
    lb_reopen_mode = 1
    dropdups = 1

    # logging
    logfile = /var/log/oscam/oscam.log
    maxlogsize = 1000
    usrfile = /var/log/oscam/oscamuser.log
    cwlogdir = /var/log/oscam/cw

    [monitor]
    port = 988
    serverip = 0.0.0.0
    nocrypt = 127.0.0.1
    aulow = 120
    monlevel = 4

    [webif]
    httpport = 8081
    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
    httprefresh = 5

    [dvbapi]
    enabled = 1
    au = 1
    user = dvbapiau
    request_mode = 0

    [newcamd]
    port = 1001@0B00:0ED9
    key = 0102030405060708091011121314
    mgclient = 1
    keepalive = 1
    allowed =

    Oscam server
    [reader]
    label = card
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    group = 1
    emmcache = 1,3,15
    audisabled = 0
    mhz = 2700
    cardmhz = -1
    Group = 1

    Oscam User
    [account]
    user = dvbapiau
    au = 1
    group = 1

    [account]
    user = user
    pwd = password
    monlevel = 4
    au = 1
    group = 1

    Sovrummet konfig filer

    mg_cfg

    # EMM messages
    # 00 don’t show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }

    # ECM messages
    # 00 don’t show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps au pid
    U: { 05 } 0x1ACB

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 04 }

    # newcamd dead routes connect retry, sec
    Q: { 120 }

    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 02 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 02 } root dreambox

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 03 } 127.0.0.1 /usr/keys/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 00 }

    Newcamd.list

    CWS=192.168.166.25 1001@0B00:0ED9 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcamd

    Loggfil från putty / telnet

    root@dm500hdv2:/usr/bin# mgcamd1.35 -d
    tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 21:33:48)
    [mg] Net:1:7:2:4s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:enigma:80:3 Cache:7 Log:3:127.0.0.1:28007 Reread:0
    [mg] Ecm cache time: 15
    Box type: dbox2
    root@dm500hdv2:/usr/bin# Conax.Key error 2: No such file or directory
    SoftCam.Key error 2: No such file or directory
    AutoRoll.Key error 2: No such file or directory
    Conax.Key error 2: No such file or directory
    [mgcam] emm thread started
    got 50 cmd 9F
    [mg0] namespace E080000 t-id 2C on-id 46
    [mg0] descramble on 8, source 3
    [mg0] service BDF index 0 pmt pid 127 (1), pids: video 0x020C, audio 0x0240 0x02B0
    [mg0] ECM: CaID: 0x0B00 -> CaPID: 0x0040 ProvID: 000000
    [mg0] No conax key(s) found for id 0 keynr 30
    [mg0] network can’t decode
    [mg0] pid 0x0040 failed to decode.
    [mgcamd] emm started
    EMM: CaID: 0x0B00 -> CaPID: 0x0030 ProvID: 000000
    [mgcamd] emm stopped

    #4271

    Zulan
    Member

    Ditt fel är i mg_cfg. Ändra B: 00 till:

    B: { 06 }

    #4272

    hano
    Member

    Tyvärr hjälpte det inte att ändra mg_cfg.
    Men jag har fått igång det med Oscam på bägge boxarna. Hurra!!!
    Körde bägge spåren parallellt.

    !!! Zulan stort tack för hjälpen !!!

    Nedan min fungerande oscam konfig.
    Vardagsrum = (OSCAM 1.20-unstable_svn build r0)
    Sovrum = (OSCAM 1.10rc-svn build #6089)

    *** Vardagsrum DM500hd OpenPli 4 Oscam.conf ***

    [global]
    maxlogsize = 1000
    preferlocalcards = 1
    lb_retrylimit = 1600
    lb_reopen_mode = 1
    dropdups = 1

    # logging
    logfile = /var/log/oscam/oscam.log
    maxlogsize = 1000
    usrfile = /var/log/oscam/oscamuser.log
    cwlogdir = /var/log/oscam/cw

    [monitor]
    port = 988
    serverip = 0.0.0.0
    nocrypt = 127.0.0.1
    aulow = 120
    monlevel = 4

    [webif]
    httpport = 8081
    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
    httprefresh = 5

    [dvbapi]
    enabled = 1
    au = 1
    user = dvbapiau
    request_mode = 0

    [newcamd]
    port = 1001@0B00:000000
    key = 0102030405060708091011121314
    mgclient = 1
    keepalive = 1

    *** Vardagsrum DM500hd OpenPli Oscam.server ***

    [reader]
    label = card
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    group = 1
    emmcache = 1,3,15
    audisabled = 0
    mhz = 2700
    cardmhz = -1
    Group = 1

    *** Vardagsrum DM500hd OpenPli Oscam.user ***

    [account]
    user = dvbapiau
    au = 1
    group = 1

    [account]
    user = user
    pwd = password
    monlevel = 4
    au = 1
    group = 1

    ***************************************************************

    *** Sovrum DM500hdv2 NewNigma2 Oscam.conf ***

    [global]
    maxlogsize = 1000
    preferlocalcards = 1
    lb_retrylimit = 1600
    lb_reopen_mode = 1
    dropdups = 1

    # logging
    logfile = /var/log/oscam/oscam.log
    maxlogsize = 1000
    usrfile = /var/log/oscam/oscamuser.log
    cwlogdir = /var/log/oscam/cw

    [monitor]
    port = 988
    serverip = 0.0.0.0
    nocrypt = 127.0.0.1
    aulow = 120
    monlevel = 4

    [webif]
    httpport = 8081
    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
    httprefresh = 10

    [dvbapi]
    enabled = 1
    au = 1
    user = dvbapiau
    request_mode = 0

    [newcamd]
    port = 1001@0B00:000000
    key = 0102030405060708091011121314
    mgclient = 1
    keepalive = 1
    allowed =

    *** Sovrum DM500hdv2 NewNigma2 Oscam.server ***

    [reader]
    label = cd
    description = vardagsrum
    protocol = newcamd
    device = 192.168.166.25,1001
    key = 0102030405060708091011121314
    user = user
    password = password
    caid = 0B00
    reconnecttimeout = 5
    group = 1

    *** Sovrum DM500hdv2 NewNigma2 Oscam.user ***

    [account]
    user = user
    pwd = password
    group = 1
    hostname = 192.168.166.25,1001
    au = 1

    #4273

    Zulan
    Member

    Jag tackar för confen, bra jobbat!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Det är dina kommentarer som skapar bloggen